Brand | Panasonic |
Usage/Application | Servo Motor |
Power | 400 W |
Voltage | 200V AC |
Model Name/Number | MHMF042L1U2M - Panasonic Minas A6 series Servo motor |
Speed | 3000-6500Rpm |
Input Phase | Single Phase/ 3 Phase |
Torque | 1.27 - 1.40 Nm |
Motor Type | AC |
Part Number | MHMF042L1U2M |
Details | High inertia, Lead wire type |
Family Name | MINAS A6 |
Series | MHMF Series |
Type | High inertia |
Flange sq. dimension | 60 mm sq. |
Flange sq. dimension (Unit:mm) | 60 |
Motor lead-out configuration | Lead wire |
Motor encoder connector | Lead wire |
Power supply capacity (kVA) | 0.9 |
Voltage specifications | 200 V |
Rated output | 400 W |
Rated current (A (rms)) | 2.1 |
Holding brake | without |
Mass (kg) | 1.2 |
Oil seal | with |
Shaft | Key-way, center tap |
Rated torque (N ⋅ m) | 1.27 |
Continuous stall torque (N ⋅ m) | 1.40 |
Momentary Max. peak torque (N ⋅ m) | 4.46 |
Max. current (A (o-p)) | 10.4 |
Rated rotational speed (r/min) | 3000 |
Rated rotational Max. speed (r/min) | 6500 |
Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 0.56 |
Recommended moment of inertia ratio of the load and the rotor | 30 times or less |
Rotary encoder: specifications | 23-bit Absolute/Incremental system |
Brand | Yasaka |
Usage/Application | Servo Application |
Power | 750W |
Voltage | 230V |
Type | AC |
Model Name/Number | SV-X2MH075A-N2LN |
Phase | Single/Three |
Speed | 3000 |
Input Phase | Single/Three |
Torque | 3.6 Nm |
Brand | Yasaka |
Usage/Application | Servo Application |
Power | 400W |
Voltage | 230V |
Model Name/Number | SV-X2MH040A-N2LN |
Speed | 3000 |
Input Phase | Single/Three |
Torque | 1.27 Nm |
Motor Type | AC |
Minimum Order Quantity | 1 Piece |
Brand | YASAKA |
Usage/Application | Servo Motor System |
Power | 750 W |
Voltage | 220V AC |
Model Name/Number | SV-X3EA075A-A2-YSK |
Speed | 3000-5000RPM |
Input Phase | Single Phase/ 3 Phase |
Torque | 2.39 - 8.36 Nm |
Motor Type | AC |
All yasaka robots are powered by yasaka servos, and customers are convined to use yasaka servos for their own machines.
Minimum Order Quantity | 1 Piece |
Brand | Panasonic |
Torque | 2.39 - 8.36 Nm |
Output Power | 750W |
Output Current | 3000 - 6000 Rpm |
Input Voltage | 200V AC Single phase/ 3 phase |
Input Phase | 3 - Phase |
Model Name/Number | MCDLT35SF |
Item | Specifications |
---|---|
Part Number | MCDLT35SF |
Details | A6SF series Multifunction type (Pulse analog full-closed) with the safety function |
Family Name | MINAS A6 |
Series | A6SF series |
Type | Multifunction type |
Frame | C-Frame |
Frequency response | 3.2 kHz |
Control method | Position control, Velocity control, Torque control, and Full-closed control |
Safety Function | with |
Supply voltage | Single/3-phase 200 V |
I/F Classification of type | Analog /Pulse, Modbus (RS485 /RS232) |
Dimensions (W) (Unit: mm) | 65 |
Dimensions (H) (Unit: mm) | 150 |
Dimensions (D) (Unit: mm) | 170 |
Mass (kg) | 1.6 |
Item | Specifications |
---|---|
Input power: Main circuit | Single/3-phase 200 to 240V +10% -15% 50/60 Hz |
Input power: Control circuit | Single phase 200 to 240V +10% -15% 50/60 Hz |
Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
External scale feedback | A/B phase, homing signal differential input. Serial communication is also supported. |
Parallel I/O connector: Control signal Input | General purpose 10 inputs The function of general-purpose input is selected by parameters. |
Parallel I/O connector: Control signal Output | General purpose 6 output The function of general-purpose output is selected by parameters. |
Parallel I/O connector: Analog signal Input | 3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
Parallel I/O connector: Analog signal Output | 2 outputs (Analog monitor: 2 output) |
Parallel I/O connector: Pulse signal Input | 2 inputs (Photo-coupler input, Line receiver input) Both open collector and line driver interface can be connected. High speed line driver interface can be connected. |
Parallel I/O connector: Pulse signal Output | 4 outputs (Line driver: 3 output, open collector: 1 output) Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal. |
Communication function | USB, RS232, RS485, Modbus-RTU |
Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
Communication function: RS232 | 1:1 communication |
Communication function: RS485 | 1: n communication (max 31) |
Communication function: Modbus-RTU | 1: n communication |
Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
Control mode | Switching among the following 7 mode is enabled, (1) Position control, (2) Speed control, (3) Torque control, (4) Position/speed control, (5) Position/Torque control, (6) Speed/Torque control, (7) Full-closed control |
Brand | Panasonic |
Usage/Application | Industrial |
Power | 750 W |
Voltage | 200V AC |
Model Name/Number | MHMF082L1U2M |
Speed | 3000-6000Rpm |
Input Phase | Single Phase/ 3 Phase |
Torque | 2.39 - 8.36 Nm |
Motor Type | AC |
Item | Specifications |
---|---|
Part Number | MHMF082L1U2M |
Details | High inertia, Lead wire type |
Family Name | MINAS A6 |
Series | MHMF Series |
Type | High inertia |
Special Order Product | Special Order Product |
Cautions for Special ordering product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
Protection class | IP65 |
About Enclosure | Except rotating portion of output shaft and leadwire end. |
Environmental Conditions | For more details, please refer to the instruction manual. |
Flange sq. dimension | 80 mm sq. |
Flange sq. dimension (Unit:mm) | 80 |
Motor lead-out configuration | Lead wire |
Motor encoder connector | Lead wire |
Power supply capacity (kVA) | 1.8 |
Voltage specifications | 200 V |
Rated output | 750 W |
Rated current (A (rms)) | 3.8 |
Holding brake | without |
Mass (kg) | 2.3 |
Oil seal | with |
Shaft | Key-way, center tap |
Rated torque (N ⋅ m) | 2.39 |
Continuous stall torque (N ⋅ m) | 2.86 |
Momentary Max. peak torque (N ⋅ m) | 8.36 |
Max. current (A (o-p)) | 18.8 |
Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4283 |
About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
Rated rotational speed (r/min) | 3000 |
Rated rotational Max. speed (r/min) | 6000 |
Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 1.56 |
Recommended moment of inertia ratio of the load and the rotor | 20 times or less |
Rotary encoder: specifications | 23-bit Absolute/Incremental system |
Item | Specifications |
---|---|
During assembly: Radial load P-direction (N) | 686 |
During assembly: Thrust load A-direction (N) | 294 |
During assembly: Thrust load B-direction (N) | 392 |
During operation: Radial load P-direction (N) | 392 |
During operation: Thrust load A, B-direction (N) | 147 |
Usage/Application | Servo System Set |
Power | 400 W |
Voltage | 200V AC |
Model Name/Number | MHMF042L1V2M - Panasonic Minas A6 Series AC Servo Motor (with Brake), 400W |
Speed | 3000-6500Rpm |
Input Phase | Single Phase/ 3 Phase |
Torque | 1.27 - 1.40 Nm |
Motor Type | AC |
Part Number | MHMF042L1V2M |
Details | High inertia, Lead wire type |
Family Name | MINAS A6 |
Series | MHMF Series |
Type | High inertia |
Flange sq. dimension | 60 mm sq. |
Flange sq. dimension (Unit:mm) | 60 |
Motor lead-out configuration | Lead wire |
Motor encoder connector | Lead wire |
Power supply capacity (kVA) | 0.9 |
Voltage specifications | 200 V |
Rated output | 400 W |
Rated current (A (rms)) | 2.1 |
Holding brake | with |
Mass (kg) | 1.6 |
Oil seal | with |
Shaft | Key-way, center tap |
Rated torque (N ⋅ m) | 1.27 |
Continuous stall torque (N ⋅ m) | 1.40 |
Momentary Max. peak torque (N ⋅ m) | 4.46 |
Max. current (A (o-p)) | 10.4 |
Rated rotational speed (r/min) | 3000 |
Rated rotational Max. speed (r/min) | 6500 |
Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 0.58 |
Recommended moment of inertia ratio of the load and the rotor | 30 times or less |
Rotary encoder: specifications | 23-bit Absolute/Incremental system |
Item | Specifications |
---|---|
Static friction torque (N ⋅ m) | 1.6 or more |
Engaging time (ms) | 50 or less |
Releasing time (ms) | 20 or less |
Exciting current (DC) (A) | 0.36 |
Releasing voltage (DC) (V) | 1 or more |
Exciting voltage (DC) (V) | 24 ± 2.4 |
Item | Specifications |
---|---|
During assembly: Radial load P-direction (N) | 392 |
During assembly: Thrust load A-direction (N) | 147 |
During assembly: Thrust load B-direction (N) | 196 |
During operation: Radial load P-direction (N) | 245 |
During operation: Thrust load A, B-direction (N) | 98 |
Type | AC |
Speed | 3000 rpm |
Voltage | 230V |
Brand | HCFA YASAKA |
Usage/Application | Servo Application |
Model Name/Number | SV-X2MH040A-N2LA |
Input Phase | Single/Three |
Torque | 1.27Nm |