Hiwin Ballscrew

HIWIN LINEAR GUIDEWAYS

Automation/Semiconductor/Medical

• BALL TYPE SERIES ( HG, EG, WE, MG, CG )
• QUIET TYPE SERIES ( QH, QE, QW, QR )
• OTHER SERIES ( RG, E2, PG, SE, RC )

AG series cross configuration linear slide

(Reduce installation space and make equipment smaller and lighter.
The two rails are processed with high accuracy in relative straightness, so there is a particularly high accuracy in verticality.
This slider is 50% more rigid than two HG sliders that are screwed back to back.)

CG series anti-torque ball linear slide
( Superior Moment Load Capacity

The CG series linear guideways have moment load capacities up to 50% higher than standard HG Assemblies. The O-Type (back-to-back) bearing configuration and an integrated recirculation unit optimize bearing circulation greatly improving moment load capacities and promoting smooth motion. An optional stainless steel cover strip increases dust protection and promotes smooth block transition.)

HG series ball-type linear slide (Load Range: 11.38 kN - 208.36 kN)

EG series low assembly linear slide ( Load Range: 5.35 kN - 33.35 kN)

MG Series Miniature Linear Slide (Load Range: 0.68 kN - 8.93 kN)

PG series precision positioning linear slide
(It has the advantages of high rigidity of linear slide rail and high precision of magnetic encoder. Built-in ruler body and inductive read head are not easily damaged by external forces. The signal induction is non-contact and the product has a long life. Long-distance measurement (up to 30m with magnetic ruler). )

QE Series Silent Low Assembly Linear Slide ( Load Range: 8.56 kN - 51.18 kN)RG series roller linear slide ( Load Range: 11.3 kN - 275.3 kN)WE series four-row wide rail linear slide ( Load Range: 5.23kN - 29.8 kN)QH Series Silent Heavy-Duty Linear Slide ( Load Range: 13.88kN - 108.72 kN)QW Series Silent Wide Linear Slide (Load Range: 16 kN - 36.8 kN)QR Series Silent Roller Linear Slide (Load Range: 26.3 kN - 150.8 kN)E2 series self-lubricating linear slide (The E2 self-lubricating linear guideway has a lubricator installed between the end cap and end seal. The block is also equipped with a replaceable/refillable oil cartridge with a removable cap for easy replenishment of oil. Lubrication flows from the oil cartridge to the lubricator and coats the grooves of the rail and raceway via capillary action. HIWIN's E2 kit extends maintenance cycles and ensures long service life.)SE Series Metal End Cap Linear Slides(The SE is a metallic end cap option for the linear guideway that increases temperature resistance. This option enables service temperatures up to 150°C and instance temperatures up to 200°C. For situations where a standard block is unable to operate due to the high working temperatures, the SE option is available for use.)

HIWIN LM Rails 

Linear guideways provides linear motion by re-circulating rolling elements between a profiled rail and a bearing block. The coefficient of friction on a linear guideway is only 1/50 compared to a traditional slide and they are able to take loads in all directions. With these features, a linear guideway can achieve high precision and greatly enhanced moving accuracy. Hiwin Corporation offers multiple linear guideway series, each featuring different options for sizes, loading capabilities, accuracies, and more.

Component features: 

• High Quality HIWIN Profile Rail (made in Taiwan)
• By Default Cut/Ground such that holes E1/E2 are equally spaced, and then deburred
• On request you can specify a different hole spacing for first/last hole (E1/E2) (In Remarks)
• Cutting tolerance: +/- 1.0mm (on request different/better tolerance is possible)
• Including Green Caps, to close the bolt holes
• We advise DIN912 M8x25 for HGR35R with ITEM/Bosch/Maytec

SERIES/SIZES Available :-

• HGR 15R
• HGR 20R
• HGR 25R
• HGR 30R
• HGR 35R
• HGR 45R
• HGR 55R
• HGR 65R

HIWIN LM Blocks

These carriages fit the HIWIN HGR and HGT Profile rails. This particular type is the wide flange type model. We also have a more compact but higher HGH type model.

Component features:

• Wide Flange type model (HGW)
• Heavy Load model (CC)
• Standard we have Z0 Pre Tension, perfect for CNC-Routers
• High Precision Class (H)
• 4 x Threaded hole in carriage allows mounting from above
• It's also possible to mount from below, when using one bolt size smaller for mounting. The block has a reces machined in it so a normal DIN912 bolt fits

MODEL NO. Available :-

• HGW 15CC
• HGW 20CC
• HGW 20HC
• HGW 25CC
• HGW 25HC
• HGW 30CC
• HGW 30HC
• HGW 35CC
• HGW 35HC
• HGW 45CC
• HGW 45HC
• HGW 55CC
• HGW 55HC
• HGW 65CC
• HGW 65HC

Product Specification

R12-5T3-RSI-34-121-0.05